Slope Stability Calculator
A soil slope with up to three layers, water and a crest surcharge: the critical circular slip by the method of slices (Bishop simplified or Ordinary), the factor of safety, the EN 1997-1 overall stability check, every check with its clause, and a step-by-step calc sheet.
EN 1997-1 11 · DA1 Combination 2 · SANS 10160-5
Slope
m
Water
m
Design
F / Fd characteristic / EN 1997-1—
Ground
m
m
m
Crest surcharge
kPa
m
m
Soil layers from the crest down
| Layer | To depth m | c′ kPa | φ′ ° | γ kN/m³ | γsat kN/m³ needed below the water line |
|---|---|---|---|---|---|
| 1 | |||||
| 2 | |||||
| 3 |
Each layer runs from the bottom of the one above (the first from the crest) to the depth given; the last layer runs to the firm base. Effective strengths c′ and φ′ (drained); for an undrained clay give c′ = cu and φ′ = 0. γsat is used below the water table (blank = γ).
Slope
Critical slip circle
Design checks
| Check | Clause | Required / found | Utilisation | Result | |
|---|---|---|---|---|---|
| Checking on the STATIX server… | |||||
Check details as text
—
—
enter the slope and the soil
Result
| Factor of safety F characteristic strengths | — |
| Critical circle centre, radius | — |
| Slip from / to x along the ground | — |
| EN 1997-1 DA1 C2: Fd M2 strengths, A2 surcharge | — |
| Circles tried | — |
Step-by-step calculation
Loading the calc sheet from the STATIX server… Start your free 14-day trial for every check and the calc sheet.
The slope here, the retaining walls and foundations next to it
Check a cut or a fill slope here; the retaining wall, pad, strip and pile calculators carry the rest of the ground works. Free 14-day trial.