Section Properties Calculator
Rectangle, I, channel, RHS, CHS, T, angle, any polygon or a library section: the inputs on top, the section drawn, every property in one table, and a step-by-step calc sheet.
Uses the STATIX section engine and section library. No design code — geometry only.
Section
Dimensions
mm
mm
Material
MPa
kg/m³
Shear
kN
Classification and moment
kNm
η, the classification case, ψ and Mf are not used in the results yet: the class is for bending, and no stresses are worked out under Mf.
Cross-section
Section properties
y-y
—
enter dimensions
| Property | Symbol | Value | Unit |
|---|---|---|---|
| Working out the properties on the STATIX server… | |||
Values as text
| Area A | — |
| Centroid (from ref) | — |
| Iy — strong (major; SANS Ix) | — |
| Iz — weak (minor; SANS Iy) | — |
| ry / rz | — |
| Wel,y / Wel,z | — |
| Wpl,y / Wpl,z | — |
| Torsion constant J | — |
| Warping constant Cw | — |
| Perimeter / mass | — |
Shear and classification
| Shear centre (offset from centroid) | — |
| Av,z / Av,y — shear area | — |
| Applied shear V | — |
| τmax,z = V·Q/(I·t) | — |
| τavg = V/Av,z | — |
| Class — EN 1993-1-1 T5.2 | — |
| Notes |
Section class
—
Applied moment — bending stress
| Applied moment Mf | — |
| σtop = Mf·ctop/Iy | — |
| σbot = Mf·cbot/Iy | — |
| Yield check vs fy | — |
Geometry checks (information)
Step-by-step calculation
Loading the calc sheet from the STATIX server… Start your free 14-day trial for every check, the calc sheet and the bending schedule.
Section comparison — all sections
Every section in the project, side by side. Use “Add section” above to compare several profiles, then Download PDF (print → Save as PDF). y = strong (major) axis, z = weak (minor) axis (EN 1993; SANS: x-x major, y-y minor); Zx/Zy are the elastic section moduli.
This isn't a toy calculator
It runs the same engine as STATIX — a full structural suite built on the same engine. Model the whole building, not just one section.