RC Section SLS Calculator
Any reinforced concrete section of rectangles (rectangle, T, I, inverted T) with any bar layers under N and M: the concrete and steel stresses for the characteristic and quasi-permanent combinations, cracked or uncracked, and the crack width to EN 1992-1-1, with every check and a step-by-step calc sheet.
EN 1992-1-1 7.2 · 7.3.4
Section
mm
mm
mm
mm
mm
mm
Actions N compression +, M + = top in compression
kNm
kN
kNm
kN
Materials
MPa
MPa
wk / wmax quasi-permanent—
Crack width
mm
mm
mm
Bar layers height above the soffit
| Layer | y mm | Bars n | Size |
|---|---|---|---|
| 1 | |||
| 2 | |||
| 3 | |||
| 4 |
Each layer: its centre height y above the soffit, the number of bars and their size. A row with y or n blank is not used.
Section
Section, neutral axis and stresses (quasi-permanent)
Design checks
| Check | Clause | Demand / capacity | Utilisation | Result | |
|---|---|---|---|---|---|
| Checking on the STATIX server… | |||||
Check details as text
—
—
enter the section, the bars and the actions
Result
| State characteristic / quasi-permanent | — |
| Neutral axis x from the top | — |
| Concrete σc char / qp | — |
| Steel σs largest tension, char / qp | — |
| Crack width wk sr,max, quasi-permanent | — |
Step-by-step calculation
Loading the calc sheet from the STATIX server… Start your free 14-day trial for every check and the calc sheet.
The section here, the member in the beam and column calculators
The RC beam and RC column calculators design whole members; this page checks one section at service loads. Free 14-day trial.