Prestressed Beam Calculator
A pre-tensioned precast beam (rectangle, T, I or inverted T) to SANS 10100-1 Section 5 / BS 8110: the strand prestress after losses, the stresses at transfer and in service, the ultimate moment, shear and links, and the camber and deflection, with every check and a step-by-step calc sheet.
SANS 10100-1 Section 5 · BS 8110-1
Section
mm
mm
mm
mm
mm
mm
Span and loads
m
kN/m
kN/m
Strands and concrete
mm
MPa
MPa
M / Mu ULS—
Prestress
%
%
Beam and links
mm
kN/m³
MPa
mm
Beam
Section, strands, stresses at transfer and in service
Design checks
| Check | Clause | Demand / capacity | Utilisation | Result | |
|---|---|---|---|---|---|
| Checking on the STATIX server… | |||||
Check details as text
—
—
enter the section, the bars and the actions
Result
| Prestress after losses fpe / fpu | — |
| Transfer: top / bottom compression + | — |
| Service: top / bottom | — |
| Mu vs M ULS | — |
| Camber / net deflection long term | — |
Step-by-step calculation
Loading the calc sheet from the STATIX server… Start your free 14-day trial for every check and the calc sheet.
Prestressed beams here, hollow-core planks next door
The hollow-core calculator checks supplier planks with the same SANS 10100-1 Section 5 engine; a precast beam with a cast topping goes to the composite page. Free 14-day trial.