Composite Precast Beam Calculator
A precast RC beam or slab with an in-situ topping, built in two stages: the precast alone (stage 1) and the composite section (stage 2) - the bending resistance of each, the shear at the interface (EN 1992-1-1 6.2.5) and the staged service stresses, with every check and a step-by-step calc sheet.
EN 1992-1-1 6.1 · 6.2.5 · 7.2
Section
mm
mm
mm
mm
Actions ULS
kNm
kNm
kN
@ mm
Materials
MPa
MPa
MPa
MEd / MRd composite—
Interface (6.2.5)
mm²/m
°
mm
MPa
Service stresses (characteristic)
kNm
kNm
Bars in the precast height above the soffit
| Layer | y mm | Bars n | Size |
|---|---|---|---|
| 1 | |||
| 2 | |||
| 3 | |||
| 4 |
Each layer: its centre height y above the soffit, the number of bars and their size. A row with y or n blank is not used.
Section
Precast + topping, bars, interface, composite neutral axis
Design checks
| Check | Clause | Demand / capacity | Utilisation | Result | |
|---|---|---|---|---|---|
| Checking on the STATIX server… | |||||
Check details as text
—
—
enter the section, the bars and the actions
Result
| Stage 1 MRd precast alone | — |
| Stage 2 MRd composite | — |
| Neutral axis x / lever arm z composite | — |
| Interface vEdi / vRdi | — |
| Concrete strengths fcd precast / topping | — |
Step-by-step calculation
Loading the calc sheet from the STATIX server… Start your free 14-day trial for every check and the calc sheet.
The composite member here, the precast slab next door
Hollow-core planks with a topping are on the hollow-core calculator; the stresses of any one section are on the RC section SLS page. Free 14-day trial.