Strip Footing Calculator
An RC strip footing under a wall, per metre run: SANS 10100-1, BS 8110-1, Eurocode 2 or SANS 51992-1-1. The section drawn, every check with its clause, and a bending schedule.
SANS 10100-1 cl.4.10 bases, cl.4.3 bending and shear, cl.4.11 detailing · EN 1992-1-1 6.1, 6.2, 9.3 · SANS 10160-1 loads
See a worked example →
Footing
m
m
mm
mm
Loads per metre run characteristic
| N kN/m | M kNm/m | H kN/m | |
|---|---|---|---|
| G | |||
| Q | |||
| W |
Soil
kPa
m
Materials
MPa
MPa
Bars
Durability
mm
Run and stability
m
Unit weights and stock
kN/m³
kN/m³
mm
Section and bearing pressure
main bars (across)distribution bars (along the run)bearing pressure (SLS)
Design checks
| Check | Clause | Demand / capacity | Utilisation | Result | |
|---|---|---|---|---|---|
| Checking on the STATIX server… | |||||
Check details as text
—
—
enter the footing
Design result
| Bearing qmax / qa | — |
| Moment at the wall face | — |
| Main bars: As,req / provided | — |
| Shear v / capacity | — |
| Distribution bars | — |
| Effective depth d / self-weight | — |
Bending schedule
Built on the STATIX server.
Bending schedule (SANS 282)
Loading… Sign in (free) to get the bending schedule: 3 designs a month.
Step-by-step calculation
Loading the calc sheet from the STATIX server… Sign in (free) for every check, the calc sheet and the bending schedule: 3 designs a month.
One footing here, every wall line in STATIX
On the STATIX project board the footing follows the wall lines of the setting-out plan, with the corner and tee bars scheduled. This calculator is free today.