Your STATIX workspace
One account across everything — the 3D analysis app, your cloud projects and every calculator. Signed in here means signed in everywhere.
3D Workspace
Model the whole frame, run the analysis, design members and check real bolted connections — one tool, one licence.
- 3D frame analysis
- Member design
- CBFEM connections
- SANS · BS · Eurocode
Concrete SANS 10100 · BS 8110 · Eurocode 2
RC Beam
Continuous spans, SFD/BMD envelopes, redistribution, detailing and full ULS/SLS checks.
RC Column
Axial + biaxial bending on a live N–M interaction diagram with slenderness checks.
Two-Way Slab
Panel moment fields with contours, reinforcement design and deflection checks.
Pad Footing
Bearing pressure, punching and beam shear, flexural design with a full calc sheet.
Pile Cap
Strut-and-tie (truss) method with punching and beam shear checks.
Punching Shear
Flat-slab punching at interior, edge and corner columns: control perimeters, β factors and shear link / stud design.
Retaining Wall
Cantilever wall: earth pressures, sliding/overturning/bearing stability, stem and base design.
Crack Width & Deflection
SLS checks: crack width and rigorous long-term deflection to code methods.
Steel SANS 10162-1 · EN 1993
Steel Member
Beam/column resistance with section classification and N–M interaction.
Base Plate
Component method base plate with anchor design and bearing pressure plots.
Section Properties
A, I, Wel, Wpl, J and Cw for I/RHS/CHS/T shapes plus the full section library.
End-Plate Connection
Bolted end-plate moment connection by the component method: Mj,Rd and bolt rows.
Eaves Haunch
Portal-frame eaves connection with haunch: component method moment resistance.
Apex Haunch
Portal ridge (apex) haunched connection by the component method.
Fin-Plate (Shear)
Simple shear connection: eccentric bolt group, plate, beam-web and weld checks.
Cold-formed steel SANS 10162-2 · AS/NZS 4600
Loads, timber & masonry
Wind Load
Wind pressure profile and zone pressures for walls and roofs, with a calc sheet.
Timber Beam
Bending, lateral-torsional buckling, shear, bearing and creep deflection.
Masonry Wall
Vertical load capacity and lateral (wind) panel checks with a calc sheet.